Skip to main content

We use cookies to understand how you use our site and improve your experience. See our Privacy Policy.

BUK7S0R5

N-channel Power MOSFET

The BUK7S0R5 is a n-channel power mosfet from Nexperia. View the full BUK7S0R5 datasheet below including key specifications.

BUK7S0R5 shares its datasheet with BUK7S0R5-40H, whose page lists every part number it covers.

Official BUK7S0R5 datasheet (PDF) — the source this page was extracted from.

Manufacturer

Nexperia

Category

N-channel Power MOSFET

BUK7S0R5 Key Specifications

ParameterValue
China RoHSNon-Compliant
Continuous Drain Current (ID)500 A
Continuous Drain Current500A (Tc)
Drain to Source Breakdown Voltage43 V
Drain to Source Resistance550 µΩ
Drain to Source Voltage (Vds)40 V
Drain-Source Voltage (Vdss)40 V
Drive Voltage (Max Rds On, Min Rds On)10V
FET TypeN-Channel
Gate Charge (Qg)267 nC @ 10 V
Gate to Source Voltage (Vgs)20 V
GradeAutomotive
Height1.85 mm
Input Capacitance (Ciss)21162 pF @ 25 V
Introduction Date2021-04-06
Lifecycle StatusProduction (Last Updated: 2 years ago)
Manufacturer Lifecycle StatusRELEASED FOR SUPPLY (Last Updated: 2 years ago)
Max Junction Temperature (Tj)175 °C
Max Operating Temperature175 °C
Max Power Dissipation375 W
Min Breakdown Voltage40 V
Min Operating Temperature-55 °C
Mounting TypeSurface Mount
Number of Channels1
Number of Elements1
Number of Terminals4
Operating Temperature-55°C ~ 175°C (TJ)
Package / CaseSOT-1235
PackagingMouseReel
Part SeriesBUK7S0
Power Dissipation375 W
Power Dissipation (Max)375W (Tc)
QualificationAEC-Q101
RatingsAEC-Q101
Rds(on)0.55mOhm @ 25A, 10V Ω
REACH SVHCAffected
RoHSCompliant
Standard Pack Qty2000
Supplier Device PackageLFPAK88 (SOT1235)
Diode TechnologyMOSFET (Metal Oxide)
Turn-Off Delay Time117 ns
Turn-On Delay Time40 ns
Vgs (Max)+20V, -10V
Gate Threshold Voltage3.6V @ 1mA

BUK7S0R5 Overview

Part: BUK7S0R5-40H — Nexperia

Type: Automotive N-channel Power MOSFET (Trench 9 superjunction)

Description: 40 V, 500 A automotive-qualified N-channel MOSFET with 0.47 mΩ typical RDSon (VGS = 10 V, 25 °C) in a copper-clip LFPAK88 package.

Operating Conditions:

  • Supply voltage: not applicable (VDS rated up to 40 V for 25 °C ≤ Tj ≤ 175 °C)
  • Operating temperature: -55 to 175 °C (junction)
  • Gate-source voltage: ±20 V

Absolute Maximum Ratings:

  • Drain-source voltage (VDS): 40 V
  • Gate-source voltage (VGS): -20 to 20 V
  • Continuous drain current (ID): 500 A (VGS = 10 V, Tmb = 25 °C; practically limited by PCB, thermal design and operating temperature)
  • Peak drain current (IDM): 2237 A (pulsed, tp ≤ 10 μs, Tmb = 25 °C)
  • Total power dissipation (Ptot): 375 W (Tmb = 25 °C)
  • Junction temperature: -55 to 175 °C
  • Storage temperature: -55 to 175 °C
  • Non-repetitive avalanche energy (EDS(AL)S): 1375 mJ (ID = 120 A, unclamped, Tj(init) = 25 °C)

Key Specs:

  • RDSon: 0.33 / 0.47 / 0.55 mΩ (min/typ/max) at VGS = 10 V, ID = 25 A, Tj = 25 °C; 0.93 mΩ typ (1.19 mΩ max) at Tj = 175 °C
  • V(BR)DSS: 40 V min at ID = 250 μA, VGS = 0 V, Tj = 25 °C
  • VGS(th): 2.4 / 3 / 3.6 V (min/typ/max) at ID = 1 mA, Tj = 25 °C
  • IDSS: 0.2 μA typ, 2.9 μA max at VDS = 40 V, Tj = 25 °C
  • Total gate charge QG(tot): 190 nC typ, 267 nC max (ID = 25 A, VDS = 32 V, VGS = 10 V); QGD 32 nC typ
  • Ciss: 15116 pF typ; Coss: 2718 pF typ (VDS = 25 V, f = 1 MHz)
  • Switching (VDS = 30 V, RL = 1.2 Ω, RG(ext) = 5 Ω): td(on) 40 ns, tr 33 ns, td(off) 117 ns, tf 48 ns (typ)
  • Rth(j-mb): 0.35 K/W typ, 0.4 K/W max
  • Body diode VSD: 0.79 V typ, 1 V max (IS = 25 A)

Features:

  • Qualified beyond AEC-Q101, -55 °C to +175 °C rating
  • LFPAK88 copper-clip package with low source inductance and low thermal resistance
  • Gull-wing leads for board-level reliability and AOI solder inspection
  • Trench 9 superjunction technology for lower RDSon, improved SOA and avalanche capability
  • Tight VGS(th) limits for easy paralleling

Applications:

  • 12 V automotive systems
  • 48 V DC/DC systems (12 V secondary side)
  • Higher power motors, lamps and solenoid control
  • Reverse polarity protection
  • Ultra high performance power switching

Package:

  • LFPAK88 (SOT1235), 4 pins plus mounting base (drain)

BUK7S0R5 Features

  • Fully automotive qualified to beyond AEC-Q101:
  • -55 °C to +175 °C rating suitable for thermally demanding environments
  • LFPAK88 package:
  • Designed for smaller footprint and improved power density over older wire bond packages such as D²PAK for today's space constrained high power automotive applications
  • Thin package and copper clip enables LFPAK88 to be highly efficient thermally
  • LFPAK copper clip technology enabling improvements over wire bond packages by:
  • Increased maximum current capability and excellent current spreading
  • Improved RDSon
  • Low source inductance
  • Low thermal resistance Rth
  • LFPAK Gull Wing leads:
  • Flexible leads enabling high Board Level Reliability absorbing mechanical and thermal cycling stress, unlike traditional QFN packages
  • Visual (AOI) soldering inspection, no need for expensive x-ray equipment
  • Easy solder wetting for good mechanical solder joint
  • Unique 40 V Trench 9 superjunction technology:
  • Reduced cell pitch and superjunction platform enables lower RDSon in the same footprint
  • Improved SOA and avalanche capability compared to standard TrenchMOS
  • Tight VGS(th) limits enable easy paralleling of MOSFETs
SymbolParameterConditionsMinTypMaxUnit
Static characteristicsStatic characteristicsStatic characteristicsStatic characteristicsStatic characteristicsStatic characteristicsStatic characteristicsStatic characteristics
R DSondrain-source on-state resistanceV GS = 10 V; I D = 25 A; T j = 25 °C; Fig. 110.330.470.55mΩ
Dynamic characteristicsDynamic characteristicsDynamic characteristicsDynamic characteristicsDynamic characteristicsDynamic characteristicsDynamic characteristicsDynamic characteristics
Q GDgate-drain chargeI D = 25 A; V DS = 32 V; V GS = 10 V; Fig. 13; Fig. 14-3265nC

BUK7S0R5 Applications

  • 12 V automotive systems
  • 48 V DC/DC systems (on 12 V secondary side)
  • Higher power motors, lamps and solenoid control
  • Reverse polarity protection
  • Ultra high performance power switching

BUK7S0R5 Thermal Information

SymbolParameterConditionsMinTypMaxUnit
R th(j-mb)thermal resistance from junction to mounting baseFig. 5-0.350.4K/W

Fig. 5. Transient thermal impedance from junction to mounting base as a function of pulse duration

BUK7S0R5 Package Information

Fig. 17. Package outline LFPAK88 (SOT1235)

Variants on the same datasheet

These parts have exact links to the same datasheet. They are candidates to compare, not verified drop-in replacements; check package, pinout and electrical limits.

Part NumberManufacturerPackage
BUK7S0R5-40HNexperia—
BUK7S0R5-40HJNexperiaSOT-1235

More datasheets

All Nexperia datasheets (60)

Data on this page is extracted from publicly available manufacturer datasheets using automated tools including AI. It may contain errors or omissions. Always verify specifications against the official manufacturer datasheet before making design or purchasing decisions. See our Terms of Service. Rights holders can submit a takedown request.

Ask your AI agent about the BUK7S0R5

Connect SheetsData to Claude, Cursor, Codex or any MCP client and your agent reads this datasheet for you: pinout, limits, register maps and design checks, with the numbers taken from the PDF.

claude mcp add --transport http sheetsdata https://mcp.sheetsdata.com/mcp

Then ask: "Can the BUK7S0R5 run from my 12 V rail? Check it against the datasheet limits."

Create a free account $2 of usage every month, no card needed.