B05_S-1WR3
Isolated DC-DC converterThe B05_S-1WR3 is a isolated dc-dc converter from Mornsun America, LLC. View the full B05_S-1WR3 datasheet below including key specifications.
Manufacturer
Mornsun America, LLC
Category
Isolated DC-DC converter
Package
SIP
Key Specifications
| Parameter | Value |
|---|---|
| Weight | 1.3g (Typ.) |
| Output Power | 1W |
| Package Dimensions | 11.60 x 6.00 x 10.16mm |
| Input Voltage Range | 4.5V to 5.5V |
| Switching Frequency | 270kHz |
| Output Voltage Range | 3.3V to 24V |
| I/O Isolation Voltage | 1.5kVDC (1 min), 3kVDC (1 sec) |
| No-Load Input Current | 5mA (min) |
| Max Output Current Range | 42mA to 303mA |
| Typical Efficiency Range | 74% to 85% |
| Operating Temperature Range | -40°C to +105°C |
Overview
Part: B05_S-1WR3 Series — MORNSUN Guangzhou Science & Technology Co., Ltd.
Type: Isolated DC-DC Converter
Description: 1W isolated DC-DC converter with fixed 5 V input, unregulated single output, and up to 85% efficiency.
Operating Conditions:
- Supply voltage: 4.5–5.5 VDC
- Operating temperature: -40 to +105 °C
- Output voltage: 3.3, 5, 9, 12, 15, 24 VDC (model dependent)
Absolute Maximum Ratings:
- Max supply voltage: 9 VDC (surge, 1 sec max)
- Max junction/storage temperature: 125 °C
Key Specs:
- Input voltage: 5 VDC nominal (4.5-5.5 VDC range)
- Output current: Up to 303 mA (for 3.3V output)
- Full load efficiency: Up to 85% (for 24V output)
- I/O Isolation voltage: 1500 VDC (1 min), 3000 VDC (1 sec)
- Load regulation: 5% to 20% (10%-100% load, output dependent)
- Ripple & Noise (20MHz bandwidth): 30 mVp-p (typ, other outputs), 50 mVp-p (typ, 24VDC output)
- Switching frequency: 270 kHz (typ, 100% load, nominal input)
- MTBF: 3500 k hours (MIL-HDBK-217F@25 °C)
Features:
- Continuous short-circuit protection
- No-load input current as low as 5mA
- Operating ambient temperature range: -40 °C to +105 °C
- High efficiency up to 85%
- I/O Isolation test voltage: 1.5k VDC/min, 3k VDC/1s
- Industry standard pin-out
- Compact SIP package
Applications:
- Pure digital circuits
- Low frequency analog circuits
- Relay-driven circuits
- Data switching circuits
Package:
- SIP (11.60 x 6.00 x 10.16mm)
Features
- Continuous short-circuit protection
- No-load input current as low as 5mA
- Operating ambient temperature range: -40 °C to +105 °C
- High efficiency up to 85%
- I/O Isolation test voltage: 1.5k VDC/min, 3k VDC/1s
- Industry standard pin-out
- Compact SIP package
Fig. 1
| Ripple & Noise* | 20MHz bandwidth | Other output 24VDC output | -- | 30 50 | 75 100 | mVp-p |
|---|---|---|---|---|---|---|
| Ripple & Noise* | 20MHz bandwidth | -- | mVp-p | |||
| Temperature Coefficient | 100% load | -- | ±0.02 | -- | %/ °C | |
| Short-circuit Protection | Continuous, self-recovery | Continuous, self-recovery | Continuous, self-recovery | Continuous, self-recovery | ||
| Note:* The 'parallel cable' method is used for Ripple and Noise test, please refer to DC-DC Converter Application Notes for specific information. | Note:* The 'parallel cable' method is used for Ripple and Noise test, please refer to DC-DC Converter Application Notes for specific information. | Note:* The 'parallel cable' method is used for Ripple and Noise test, please refer to DC-DC Converter Application Notes for specific information. | Note:* The 'parallel cable' method is used for Ripple and Noise test, please refer to DC-DC Converter Application Notes for specific information. | Note:* The 'parallel cable' method is used for Ripple and Noise test, please refer to DC-DC Converter Application Notes for specific information. | Note:* The 'parallel cable' method is used for Ripple and Noise test, please refer to DC-DC Converter Application Notes for specific information. | Note:* The 'parallel cable' method is used for Ripple and Noise test, please refer to DC-DC Converter Application Notes for specific information. |
| General Specifications | General Specifications | General Specifications | General Specifications | General Specifications | General Specifications | General Specifications |
|---|---|---|---|---|---|---|
| Item | Operating Conditions | Operating Conditions | Min. | Typ. | Max. | Unit |
| Isolation | Input-output electric strength test for 1 minute with a leakage current of 1mA max. | Input-output electric strength test for 1 minute with a leakage current of 1mA max. | 1500 | -- | -- | VDC |
| Isolation | Input-output electric strength test for 1 second with a leakage current of 1mA max. | Input-output electric strength test for 1 second with a leakage current of 1mA max. | 3000 | -- | -- | VDC |
| Insulation Resistance | Input-output resistance at 500VDC | Input-output resistance at 500VDC | 1000 | -- | -- | M Ω |
| Isolation Capacitance | Input-output capacitance at 100kHz/0.1V | Input-output capacitance at 100kHz/0.1V | -- | 20 | -- | pF |
| Operating Temperature | Derating when operating temperature ≥ 85 °C , (see Fig. 2) | Derating when operating temperature ≥ 85 °C , (see Fig. 2) | -40 | -- | 105 | |
| Storage Temperature | Storage Temperature | -55 | -- | 125 | ||
| Case Temperature Rise | Ta=25 °C | 3.3VDC output | -- | 25 | -- | °C |
| Case Temperature Rise | Ta=25 °C | Other output | -- | 15 | -- | |
| Pin Soldering Resistance Temperature | Soldering spot is 1.5mm away from case for 10 seconds | Soldering spot is 1.5mm away from case for 10 seconds | -- | -- | 300 | |
| Storage Humidity | Non-condensing | Non-condensing | -- | -- | 95 | %RH |
| Switching Frequency | 100% load, nominal input voltage | 100% load, nominal input voltage | -- | 270 | -- | kHz |
| MTBF | MIL-HDBK-217F@25 °C | MIL-HDBK-217F@25 °C | 3500 | -- | -- | k hours |
| Mechanical Specifications | Mechanical Specifications |
|---|---|
| Case Material | Black plastic; flame-retardant and heat-resistant plastic (UL94 V-0) |
| Dimensions | 11.60 x 6.00 x 10.16mm |
| Weight | 1.3g(Typ.) |
| Cooling Method | Free air convection |
| Electromagnetic Compatibility (EMC) | Electromagnetic Compatibility (EMC) | Electromagnetic Compatibility (EMC) | Electromagnetic Compatibility (EMC) | Electromagnetic Compatibility (EMC) |
|---|---|---|---|---|
| Emissions | CE | CISPR32/EN55032 | CLASS B (see Fig. 4 for recommended circuit) | CLASS B (see Fig. 4 for recommended circuit) |
| Emissions | RE | CISPR32/EN55032 | CLASS B (see Fig. 4 for recommended circuit) | CLASS B (see Fig. 4 for recommended circuit) |
| lmmunity | ESD | IEC/EN61000-4-2 | Air ±8kV, Contact ±4kV | perf. Criteria B |
Typical Application
Input and/or output ripple can be further reduced, by connecting a filter capacitor from the input and/or output terminals to ground as shown in Fig. 3.
Choosing suitable filter capacitor values is very important for a smooth operation of the modules, particularly to avoid start-up problems caused by capacitor values that are too high. For recommended input and output capacitor values refer to Table 1.
| Recommended capacitive load value table (Table 1) | Recommended capacitive load value table (Table 1) | Recommended capacitive load value table (Table 1) | Recommended capacitive load value table (Table 1) |
|---|---|---|---|
| Vin | Cin | Vout | Cout |
| 5VDC | 4.7μF/16V | 3.3/5VDC | 10μF/16V |
| -- | -- | 9/12VDC | 2.2μF/25V |
| -- | -- | 15/24VDC | 1μF/50V |
Related Variants
The following components are covered by the same datasheet.
| Part Number | Manufacturer | Package |
|---|---|---|
| B0505S-1WR3 | Mornsun America, LLC | 4-SIP Module |
Data on this page is extracted from publicly available manufacturer datasheets using automated tools including AI. It may contain errors or omissions. Always verify specifications against the official manufacturer datasheet before making design or purchasing decisions. See our Terms of Service. Rights holders can submit a takedown request.
Get structured datasheet data via API
Get started free