AP2112K
The AP2112K is an electronic component from Diodes Incorporated. View the full AP2112K datasheet below including key specifications, electrical characteristics, absolute maximum ratings.
AP2112K shares its datasheet with AP2112K-3.3, whose page lists every part number it covers.
Official AP2112K datasheet (PDF) — the source this page was extracted from.
Manufacturer
Diodes IncorporatedAP2112K Key Specifications
| Parameter | Value |
|---|---|
| Output Current | 600mA (Min.) |
| Output Voltage Accuracy | ±1.5% |
| Dropout Voltage (3.3V) | 250mV (Typ.) @IOUT = 600mA |
| Quiescent Current | 55μA (Typ.) @IOUT = 0mA |
| Standby Current | 0.01μA (Typ.) |
| Load Regulation | 0.2%/A (Typ.) |
| Line Regulation | 0.02%/V (Typ.) |
| PSRR | 65dB (Typ.) @100Hz, 1kHz, IOUT = 100mA |
| RMS Output Noise | 50μVRMS (Typ.) |
AP2112K Overview
Part: AP2112 — Diodes Incorporated
Type: CMOS Low Dropout Linear Regulator
Description: CMOS process low dropout linear regulator with enable function, delivering a guaranteed 600mA continuous load current and available in fixed output voltages of 1.2V, 1.8V, 2.5V, 2.6V, or 3.3V.
Operating Conditions:
- Supply voltage: 2.5–6 V
- Operating temperature: -40 to 85 °C
- Output voltage: 1.2V, 1.8V, 2.5V, 2.6V, or 3.3V (fixed)
Absolute Maximum Ratings:
- Max supply voltage: 6.5 V
- Max junction temperature: +150 °C
Key Specs:
- Output Current: 600mA (Min.)
- Output Voltage Accuracy: ±1.5%
- Dropout Voltage (3.3V): 250mV (Typ.) @IOUT = 600mA
- Quiescent Current: 55μA (Typ.) @IOUT = 0mA
- Standby Current: 0.01μA (Typ.)
- Load Regulation: 0.2%/A (Typ.)
- Line Regulation: 0.02%/V (Typ.)
- PSRR: 65dB (Typ.) @100Hz, 1kHz, IOUT = 100mA
- RMS Output Noise: 50μVRMS (Typ.)
Features:
- Output Voltage Accuracy: ± 1.5%
- Output Current: 600mA (Min.)
- Foldback Short Current Protection: 50mA
- Enable Function to Turn ON/OFF VOUT
- Low Dropout Voltage (3.3V): 250mV (Typ.) @IOUT = 600mA
- Excellent Load Regulation: 0.2%/A (Typ.)
- Excellent Line Regulation: 0.02%/V (Typ.)
- Low Quiescent Current: 55μA (Typ.)
- Low Standby Current: 0.01μA (Typ.)
- Low Output Noise: 50μVRMS
- PSRR: 100Hz -65dB, 1kHz -65dB
- OTSD Protection
- Stable with 1.0μF Flexible Cap: Ceramic, Tantalum and Aluminum Electrolytic
- Operation Temperature Range: -40°C to +85°C
- ESD: MM 400V, HBM 4000V
- Totally Lead-Free & Fully RoHS Compliant
- Halogen and Antimony Free. 'Green' Device
Applications:
- Laptop Computer
- LCD Monitor
- Portable DVD
Package:
- SOT25
- SOT89-5
- SO-8
AP2112K Features
- Output Voltage Accuracy: ± 1.5%
- Output Current: 600mA (Min.)
- Foldback Short Current Protection: 50mA
- Enable Function to Turn ON/OFF VOUT
- Low Dropout Voltage (3.3V): 250mV (Typ.) @IOUT = 600mA
- Excellent Load Regulation: 0.2%/A (Typ.)
- Excellent Line Regulation: 0.02%/V (Typ.)
- Low Quiescent Current: 55μ A (Typ.)
- Low Standby Current: 0.01μ A (Typ.)
- Low Output Noise: 50μ VRMS
- PSRR: 100Hz -65dB, 1kHz -65dB
- OTSD Protection
- Stable with 1.0μ F Flexible Cap: Ceramic, Tantalum and Aluminum Electrolytic
- Operation Temperature Range: -40° C to +85° C
- ESD: MM 400V, HBM 4000V
- Totally Lead-Free & Fully RoHS Compliant (Notes 1 & 2)
- Halogen and Antimony Free. 'Green' Device (Note 3)
AP2112K Applications
- Laptop Computer
- LCD Monitor
- Portable DVD
Notes:
- No purposely added lead. Fully EU Directive 2002/95/EC (RoHS) & 2011/65/EU (RoHS 2) compliant.
- See http://www.diodes.com/quality/lead\_free.html for more information about Diodes Incorporated's definitions of Halogen- and Antimony-free, "Green" and Lead-free.
- Halogen- and Antimony-free "Green‖ products are defined as those which contain <900ppm bromine, <900ppm chlorine (<1500ppm total Br + Cl) and <1000ppm antimony compounds.
AP2112
AP2112K Pin Configuration
AP2112K Electrical Characteristics
AP2112-1.2 Electrical Characteristics (@VIN = 2.5V, CIN = 1.0μ F (Ceramic), COUT = 1.0μ F (Ceramic), Typical TA = +25° C, unless otherwise specified (Note 6))
Note 6: Production testing at TA = +25° C. Over temperature specifications guaranteed by design only.
| Symbol | Parameter | Conditions | Conditions | Min | Typ | Max | Unit |
|---|---|---|---|---|---|---|---|
| V OUT | Output Voltage | V IN = 2.5V, 1mA ≤ I OUT ≤ 30mA | V IN = 2.5V, 1mA ≤ I OUT ≤ 30mA | V OUT *98.5% | 1.2 | V OUT *101.5% | V |
| I OUT(MAX) | Maximum Output Current | V IN = 2.5V, V OUT = 1.182V to 1.218V | V IN = 2.5V, V OUT = 1.182V to 1.218V | 600 | - | - | mA |
| (∆V OUT /V OUT )/∆I OUT | Load Regulation | V IN = 2.5V, 1mA ≤ I OUT ≤ 600mA | V IN = 2.5V, 1mA ≤ I OUT ≤ 600mA | -1 | 0.2 | 1 | %/A |
| (∆V OUT /V OUT )/∆V IN | Line Regulation | 2.5V ≤ V IN ≤ 6V, I OUT = 30mA | 2.5V ≤ V IN ≤ 6V, I OUT = 30mA | -0.1 | 0.02 | 0.1 | %/V |
| V DROP | Dropout Voltage | I OUT = 10mA | I OUT = 10mA | - | 1000 | 1300 | mV |
| V DROP | Dropout Voltage | I OUT = 300mA | I OUT = 300mA | - | 1000 | 1300 | mV |
| V DROP | Dropout Voltage | I OUT = 600mA | I OUT = 600mA | - | 1000 | 1300 | mV |
| I Q | Quiescent Current | V IN = 2.5V, I OUT = 0mA | V IN = 2.5V, I OUT = 0mA | - | 55 | 80 | μA |
| I STD | Standby Current | V IN = 2.5V, V EN in OFF mode | V IN = 2.5V, V EN in OFF mode | - | 0.01 | 1.0 | μA |
| PSRR | Power Supply Rejection Ratio | Ripple 0.5Vp-p V IN = 2.5V, | f = 100Hz | - | 65 | - | dB |
| PSRR | Power Supply Rejection Ratio | I OUT = 100mA | f = 1kHz | - | 65 | - | dB |
| (∆V OUT /V OUT )/∆T | Output Voltage Temperature Coefficient | I OUT = 30mA T A = -40° C to +85° C | I OUT = 30mA T A = -40° C to +85° C | - | ±100 | - | ppm/° C |
| I SHORT | Short Current Limit | V OUT = 0V | V OUT = 0V | - | 50 | - | mA |
| V NOISE | RMS Output Noise | No Load, 10Hz ≤ f ≤ 100kHz | No Load, 10Hz ≤ f ≤ 100kHz | - | 50 | - | μV RMS |
| V IH | V EN High Voltage | Enable logic high, regulator on | Enable logic high, regulator on | 1.5 | - | 6.0 | V |
| V IL | V EN Low Voltage | Enable logic low, regulator off | Enable logic low, regulator off | 0 | - | 0.4 | V |
| t S | Start-up Time | No Load | No Load | - | 20 | - | μs |
| R PD | EN Pull Down Resistor | - | - | - | 3.0 | - | MΩ |
| R DCHG | V OUT Discharge Resistor | Set EN pin at Low | Set EN pin at Low | - | 60 | - | Ω |
| T OTSD | Thermal Shutdown Temperature | - | - | - | +160 | - | ° C |
| T HYOTSD | Thermal Shutdown Hysteresis | - | - | - | +25 | - | |
| θ JC | Thermal Resistance | SOT25 | SOT25 | - | 96 | - | |
| θ JC | (Junction to Case) | SO-8 | SO-8 | - | 75 | - | ° C/W |
| θ JC | (Junction to Case) | SOT89-5 | SOT89-5 | - | 47 | - |
Note 6: Production testing at TA = +25° C. Over temperature specifications guaranteed by design only.
AP2112-1.8 Electrical Characteristics (@VIN = 2.8V, CIN = 1.0μ F (Ceramic), COUT = 1.0μ F (Ceramic), Typical TA = +25° C, unless otherwise specified (Note 6))
Note 6: Production testing at TA = +25° C. Over temperature specifications guaranteed by design only.
| Symbol | Parameter | Conditions | Conditions | Min | Typ | Max | Unit |
|---|---|---|---|---|---|---|---|
| V OUT | Output Voltage | V IN = 2.8V, 1mA ≤ I OUT ≤ 30mA | V IN = 2.8V, 1mA ≤ I OUT ≤ 30mA | V OUT *98.5% | 1.8 | V OUT *101.5% | V |
| I OUT(MAX) | Maximum Output Current | V IN = 2.8V, V OUT = 1.773V to 1.827V | V IN = 2.8V, V OUT = 1.773V to 1.827V | 600 | - | - | mA |
| (∆V OUT /V OUT )/∆I OUT | Load Regulation | V OUT = 1.8V, V IN = V OUT +1V, 1mA ≤ I OUT ≤ 600mA | V OUT = 1.8V, V IN = V OUT +1V, 1mA ≤ I OUT ≤ 600mA | -1 | 0.2 | 1 | %/A |
| (∆V OUT /V OUT )/∆V IN | Line Regulation | 2.8V ≤ V IN ≤ 6V, I OUT = 30mA | 2.8V ≤ V IN ≤ 6V, I OUT = 30mA | -0.1 | 0.02 | 0.1 | %/V |
| V DROP | Dropout Voltage | I OUT = 10mA | I OUT = 10mA | - | 500 | 700 | mV |
| V DROP | Dropout Voltage | I OUT = 300mA | I OUT = 300mA | - | 500 | 700 | mV |
| V DROP | Dropout Voltage | I OUT = 600mA | I OUT = 600mA | - | 500 | 700 | mV |
| I Q | Quiescent Current | V IN = 2.8V, I OUT = 0mA | V IN = 2.8V, I OUT = 0mA | - | 55 | 80 | μA |
| I STD | Standby Current | V IN = 2.8V, V EN in OFF mode | V IN = 2.8V, V EN in OFF mode | - | 0.01 | 1.0 | μA |
| PSRR | Ripple 0.5Vp-p | f = 100Hz | - | 65 | - | dB | |
| PSRR | Power Supply Rejection Ratio | V IN = 2.8V, I OUT = 100mA | f = 1kHz | - | 65 | - | dB |
| (∆V OUT /V OUT )/∆T | Output Voltage Temperature Coefficient | I OUT = 30mA T A = -40° C to +85° C | I OUT = 30mA T A = -40° C to +85° C | - | ±100 | - | ppm/° C |
| I SHORT | Short Current Limit | V OUT = 0V | V OUT = 0V | - | 50 | - | mA |
| V NOISE | RMS Output Noise | No Load, 10Hz ≤ f ≤ 100kHz | No Load, 10Hz ≤ f ≤ 100kHz | - | 50 | - | μV RMS |
| V IH | V EN High Voltage | Enable logic high, regulator on | Enable logic high, regulator on | 1.5 | - | 6.0 | |
| V IL | V EN Low Voltage | Enable logic low, regulator off | Enable logic low, regulator off | 0 | - | 0.4 | V |
| t S | Start-up Time | No Load | No Load | - | 20 | - | μs |
| R PD | EN Pull Down Resistor | - | - | - | 3.0 | - | MΩ |
| R DCHG | V OUT Discharge Resistor | Set EN pin at Low | Set EN pin at Low | - | 60 | - | Ω |
| T OTSD | Thermal Shutdown Temperature | - | - | - | +160 | - | |
| T HYOTSD | Thermal Shutdown Hysteresis | - | - | - | +25 | - | ° C |
| θ JC | SOT25 | SOT25 | - | 96 | - | ||
| θ JC | Thermal Resistance (Junction to Case) | SO-8 | SO-8 | - | 75 | - | ° C/W |
| θ JC | SOT89-5 | SOT89-5 | - | 47 | - |
Note 6: Production testing at TA = +25° C. Over temperature specifications guaranteed by design only.
AP2112-2.5 Electrical Characteristics (@VIN = 3.5V, CIN = 1.0μ F (Ceramic), COUT = 1.0μ F (Ceramic), Typical TA = +25° C, unless otherwise specified (Note 6))
Note 6: Production testing at TA = +25° C. Over temperature specifications guaranteed by design only.
| Symbol | Parameter | Conditions | Conditions | Min | Typ | Max | Unit |
|---|---|---|---|---|---|---|---|
| V OUT | Output Voltage | V IN = 3.5V, 1mA ≤ I OUT ≤ 30mA | V IN = 3.5V, 1mA ≤ I OUT ≤ 30mA | V OUT *98.5% | 2.5 | V OUT *101.5% | V |
| I OUT(MAX) | Maximum Output Current | V IN = 3.5V, V OUT = 2.463V to 2.537V | V IN = 3.5V, V OUT = 2.463V to 2.537V | 600 | - | - | mA |
| (∆V OUT /V OUT )/∆I OUT | Load Regulation | V OUT = 2.5V, V IN = V OUT +1V, 1mA ≤ I OUT ≤ 600mA | V OUT = 2.5V, V IN = V OUT +1V, 1mA ≤ I OUT ≤ 600mA | -1 | 0.2 | 1 | %/A |
| (∆V OUT /V OUT )/∆V IN | Line Regulation | 3.5V ≤ V IN ≤ 6V, I OUT = 30mA | 3.5V ≤ V IN ≤ 6V, I OUT = 30mA | -0.1 | 0.02 | 0.1 | %/V |
| V DROP | Dropout Voltage | I OUT = 10mA | I OUT = 10mA | - | 5 | 8 | mV |
| V DROP | Dropout Voltage | I OUT = 300mA | I OUT = 300mA | - | 125 | 200 | mV |
| V DROP | Dropout Voltage | I OUT = 600mA | I OUT = 600mA | - | 250 | 400 | mV |
| I Q | Quiescent Current | V IN = 3.5V, I OUT = 0mA | V IN = 3.5V, I OUT = 0mA | - | 55 | 80 | μA |
| I STD | Standby Current | V IN = 3.5V, V EN in OFF mode | V IN = 3.5V, V EN in OFF mode | - | 0.01 | 1.0 | μA |
| PSRR | Power Supply Rejection Ratio | Ripple 0.5Vp-p V = 3.5V, | f = 100Hz | - | 65 | - | dB |
| (∆V OUT /V OUT )/∆T | Output Voltage Temperature Coefficient | IN I OUT = 100mA I OUT = 30mA | f = 1KHz | - - | 65 ±100 | - - | ppm/° C |
| I SHORT | Short Current Limit | T A = -40° C to +85° C V OUT = 0V | T A = -40° C to +85° C V OUT = 0V | - | 50 | - | mA |
| V NOISE | RMS Output Noise | No Load, 10Hz ≤ f ≤ 100kHz | No Load, 10Hz ≤ f ≤ 100kHz | - | 50 | - | μV RMS |
| V IH | V EN High Voltage | 1.5 | - | 6.0 | |||
| V IL | V EN Low Voltage | Enable logic high, regulator on Enable logic low, regulator off | Enable logic high, regulator on Enable logic low, regulator off | 0 | - | 0.4 | V |
| t S | Start-up Time | No Load | No Load | - | 20 | - | μs |
| R PD | EN Pull Down Resistor | - | - | - | 3.0 | - | MΩ |
| R DCHG | V OUT Discharge Resistor | Set EN pin at Low | Set EN pin at Low | - - | 60 | - - | Ω |
| T OTSD | Thermal Shutdown Temperature | - | - | +160 | |||
| T HYOTSD | Thermal Shutdown Hysteresis | - | - | - | +25 | - | ° C |
| θ JC | SOT25 | SOT25 | - | 96 | - | ||
| θ JC | Thermal Resistance (Junction to Case) | SO-8 | SO-8 | - | 75 | - | ° C/W |
| θ JC | SOT89-5 | SOT89-5 | - | 47 | - |
Note 6: Production testing at TA = +25° C. Over temperature specifications guaranteed by design only.
AP2112-2.6 Electrical Characteristics (@VIN = 3.6V, CIN = 1.0μ F (Ceramic), COUT = 1.0μ F (Ceramic), Typical TA = +25° C, unless otherwise specified (Note 6))
Note 6: Production testing at TA = +25° C. Over temperature specifications guaranteed by design only.
| Symbol | Parameter | Conditions | Conditions | Min | Typ | Max | Unit |
|---|---|---|---|---|---|---|---|
| V OUT | Output Voltage | V IN = 3.6V, 1mA ≤ I OUT ≤ 30mA | V IN = 3.6V, 1mA ≤ I OUT ≤ 30mA | V OUT *98.5% | 2.6 | V OUT *101.5% | V |
| I OUT(MAX) | Maximum Output Current | V IN = 3.6V, V OUT = 2.561V to 2.639V | V IN = 3.6V, V OUT = 2.561V to 2.639V | 600 | - | - | mA |
| (∆V OUT /V OUT )/∆I OUT | Load Regulation | V OUT = 2.6V, V IN = V OUT +1V, 1mA ≤ I OUT ≤ 600mA | V OUT = 2.6V, V IN = V OUT +1V, 1mA ≤ I OUT ≤ 600mA | -1 | 0.2 | 1 | %/A |
| (∆V OUT /V OUT )/∆V IN | Line Regulation | 3.6V ≤ V IN ≤ 6V, I OUT = 30mA | 3.6V ≤ V IN ≤ 6V, I OUT = 30mA | -0.1 | 0.02 | 0.1 | %/V |
| V DROP | Dropout Voltage | I OUT = 10mA | I OUT = 10mA | - | 5 | 8 | mV |
| V DROP | Dropout Voltage | I OUT = 300mA | I OUT = 300mA | - | 125 | 200 | mV |
| V DROP | Dropout Voltage | I OUT = 600mA | I OUT = 600mA | - | 250 | 400 | mV |
| I Q | Quiescent Current | V IN = 3.6V, I OUT = 0mA | V IN = 3.6V, I OUT = 0mA | - | 55 | 80 | μA |
| I STD | Standby Current | V IN = 3.6V, V EN in OFF mode | V IN = 3.6V, V EN in OFF mode | - | 0.01 | 1.0 | μA |
| PSRR | Power Supply Rejection Ratio | Ripple 0.5Vp-p V = 3.6V, | f = 100Hz | - | 65 | - | dB |
| (∆V OUT /V OUT )/∆T | Output Voltage Temperature Coefficient | IN I OUT = 100mA I OUT = 30mA | f = 1kHz | - - | 65 ±100 | - - | ppm/° C |
| I SHORT | Short Current Limit | T A = -40° C to +85° C V OUT = 0V | T A = -40° C to +85° C V OUT = 0V | - | 50 | - | mA |
| V NOISE | RMS Output Noise | No Load, 10Hz ≤ f ≤ 100kHz | No Load, 10Hz ≤ f ≤ 100kHz | - | 50 | - | μV RMS |
| V IH | V EN High Voltage | Enable logic high, regulator on | Enable logic high, regulator on | 1.5 | - | 6.0 | |
| V IL | V EN Low Voltage | Enable logic low, regulator off | Enable logic low, regulator off | 0 | - | 0.4 | V |
| t S | Start-up Time | No Load | No Load | - | 20 | - | μs |
| R PD | EN Pull Down Resistor | - | - | - | 3.0 | - | MΩ |
| R DCHG | V OUT Discharge Resistor | Set EN pin at Low | Set EN pin at Low | - - | 60 | - - | Ω |
| T OTSD | Thermal Shutdown Temperature | - | - | +160 | |||
| T HYOTSD | Thermal Shutdown Hysteresis | - | - | - | +25 | - | ° C |
| θ JC | SOT25 | SOT25 | - | 96 | - | ||
| θ JC | Thermal Resistance (Junction to Case) | SO-8 | SO-8 | - | 75 | - | ° C/W |
| θ JC | SOT89-5 | SOT89-5 | - | 47 | - |
Note 6: Production testing at TA = +25° C. Over temperature specifications guaranteed by design only.
AP2112-3.3 Electrical Characteristics (@VIN = 4.3V, CIN = 1.0μ F (Ceramic), COUT = 1.0μ F (Ceramic), Typical TA = +25° C, unless otherwise specified (Note 6))
Note 6: Production testing at TA = +25° C. Over temperature specifications guaranteed by design only.
| Symbol | Parameter | Conditions | Conditions | Min | Typ | Max | Unit |
|---|---|---|---|---|---|---|---|
| V OUT | Output Voltage | V IN = 4.3V, 1mA ≤ I OUT ≤ 30mA | V IN = 4.3V, 1mA ≤ I OUT ≤ 30mA | V OUT *98.5% | 3.3 | V OUT *101.5% | V |
| I OUT(MAX) | Maximum Output Current | V IN = 4.3V, V OUT = 3.251V to 3.350V | V IN = 4.3V, V OUT = 3.251V to 3.350V | 600 | - | - | mA |
| (∆V OUT /V OUT )/∆I OUT | Load Regulation | V IN = 4.3V, 1mA ≤ I OUT ≤ 600mA | V IN = 4.3V, 1mA ≤ I OUT ≤ 600mA | -1 | 0.2 | 1 | %/A |
| (∆V OUT /V OUT )/∆V IN | Line Regulation | 4.3V≤ V IN ≤ 6V, I OUT = 30mA | 4.3V≤ V IN ≤ 6V, I OUT = 30mA | -0.1 | 0.02 | 0.1 | %/V |
| V DROP | Dropout Voltage | I OUT = 10mA | I OUT = 10mA | - | 5 | 8 | mV |
| V DROP | Dropout Voltage | I OUT = 300mA | I OUT = 300mA | - | 125 | 200 | mV |
| V DROP | Dropout Voltage | I OUT = 600mA | I OUT = 600mA | - | 250 | 400 | mV |
| I Q | Quiescent Current | V IN = 4.3V, I OUT = 0mA | V IN = 4.3V, I OUT = 0mA | - | 55 | 80 | μA |
| I STD | Standby Current | V IN = 4.3V, V EN in OFF mode | V IN = 4.3V, V EN in OFF mode | - | 0.01 | 1.0 | μA |
| PSRR | Power Supply Rejection Ratio | Ripple 0.5Vp-p V IN = 4.3V, | f = 100Hz | - | 65 | - | dB |
| PSRR | Power Supply Rejection Ratio | I OUT = 100mA | f = 1kHz | - | 65 | - | dB |
| (∆V OUT /V OUT )/∆T | Output Voltage Temperature Coefficient | I OUT = 30mA T A = -40° C to +85° C | I OUT = 30mA T A = -40° C to +85° C | - | ±100 | - | ppm/° C |
| I SHORT | Short Current Limit | V OUT = 0V | V OUT = 0V | - | 50 | - | mA |
| V NOISE | RMS Output Noise | No Load, 10Hz ≤ f ≤ 100kHz | No Load, 10Hz ≤ f ≤ 100kHz | - | 50 | - | μV RMS |
| V IH | V EN High Voltage | Enable logic high, regulator on | Enable logic high, regulator on | 1.5 | - | 6.0 | V |
| V IL | V EN Low Voltage | Enable logic low, regulator off | Enable logic low, regulator off | 0 | - | 0.4 | V |
| t S | Start-up Time | No Load | No Load | - | 20 | - | μs |
| R PD | EN Pull Down Resistor | - | - | - | 3.0 | - | MΩ |
| R DCHG | V OUT Discharge Resistor | Set EN pin at Low | Set EN pin at Low | - | 60 | - | Ω |
| T OTSD | Thermal Shutdown Temperature | - | - | - | +160 | - | ° C |
| T HYOTSD | Thermal Shutdown Hysteresis | - | - | - | +25 | - | |
| θ JC | Thermal Resistance (Junction to Case) | SOT25 | SOT25 | - | 96 | - | |
| θ JC | Thermal Resistance (Junction to Case) | SO-8 | SO-8 | - | 75 | - | ° C/W |
| θ JC | Thermal Resistance (Junction to Case) | SOT89-5 | SOT89-5 | - | 47 | - |
Note 6: Production testing at TA = +25° C. Over temperature specifications guaranteed by design only.
AP2112K Absolute Maximum Ratings
| Symbol | Parameter | Rating | Rating | Unit |
|---|---|---|---|---|
| V CC | Power Supply Voltage | 6.5 | 6.5 | V |
| T J | Operating Junction Temperature Range | +150 | +150 | ° C |
| T STG | Storage Temperature Range | -65 to +150 | -65 to +150 | ° C |
| T LEAD | Lead Temperature (Soldering, 10 Seconds) | +260 | +260 | ° C |
| θ JA | Thermal Resistance (Junction to Ambient)(No Heatsink) | SOT25 | 184 | ° C/W |
| θ JA | Thermal Resistance (Junction to Ambient)(No Heatsink) | SO-8 | 114 | ° C/W |
| θ JA | Thermal Resistance (Junction to Ambient)(No Heatsink) | SOT89-5 | 120 | ° C/W |
| - | ESD (Machine Model) | 400 | 400 | V |
| - | ESD (Human Body Model) | 4000 | 4000 | V |
AP2112K Recommended Operating Conditions
| Symbol | Parameter | Min | Max | Unit |
|---|---|---|---|---|
| V IN | Supply Voltage | 2.5 | 6 | V |
| T A | Ambient Operation Temperature Range | -40 | 85 | ° C |
AP2112
AP2112K Typical Application
Note 4: It is recommended to use X7R or X5R dielectric capacitor if 1.0μ F ceramic capacitor is selected as input/output capacitors.
AP2112K Package Information
More datasheets
Data on this page is extracted from publicly available manufacturer datasheets using automated tools including AI. It may contain errors or omissions. Always verify specifications against the official manufacturer datasheet before making design or purchasing decisions. See our Terms of Service. Rights holders can submit a takedown request.
Ask your AI agent about the AP2112K
Connect SheetsData to Claude, Cursor, Codex or any MCP client and your agent reads this datasheet for you: pinout, limits, register maps and design checks, with the numbers taken from the PDF.
claude mcp add --transport http sheetsdata https://mcp.sheetsdata.com/mcp
Then ask: "Can the AP2112K run from my 12 V rail? Check it against the datasheet limits."
Create a free account $2 of usage every month, no card needed.