ADUM1400CRWZ

Part: ADuM1400 / ADuM1401 / ADuM1402 (including automotive ADuM1400W/1401W/1402W) — Analog Devices

Type: Quad-Channel Digital Isolator (iCoupler)

Description: Quad-channel bidirectional digital isolator with 2.7–5.5 V supplies on each side, data rates up to 90 Mbps (CRW grade), 2500 V rms isolation, and operation up to 105 °C (125 °C for automotive W grades).

Operating Conditions:

• Supply voltage (VDD1, VDD2): 2.7–5.5 V (3.0–5.5 V for automotive W grades)
• Operating temperature: -40 to +105 °C (-40 to +125 °C for ADuM1400W/1401W/1402W)
• Input signal rise and fall times: 1.0 ms max

Absolute Maximum Ratings:

• Supply voltage (VDD1, VDD2): -0.5 to +7.0 V
• Input voltage: -0.5 V to VDDI + 0.5 V
• Output voltage: -0.5 V to VDDO + 0.5 V
• Average output current per pin: ±18 mA (Side 1), ±22 mA (Side 2)
• Common-mode transients: -100 to +100 kV/μs
• Storage temperature: -65 to +150 °C
• Ambient operating temperature: -40 to +105 °C (-40 to +125 °C for W grades)

Key Specs:

• Input supply current per channel, quiescent (5 V): 0.50 mA typ, 0.53 mA max
• Output supply current per channel, quiescent (5 V): 0.19 mA typ, 0.21 mA max
• ADuM1400 supply current at 90 Mbps (5 V, CRW): IDD1 70 mA typ / 100 mA max; IDD2 18 mA typ / 25 mA max
• Logic thresholds (5 V): VIH min 2.0 V, VIL max 0.8 V
• Logic high output (5 V): VDD - 0.1 V min at -20 μA; VDD - 0.4 V min at -4 mA
• CRW grade (5 V): max data rate 90 Mbps min, propagation delay 18–32 ns, PWD 2 ns max, codirectional channel matching 2 ns max
• BRW grade (5 V): data rate 10 Mbps min, propagation delay 20–50 ns, PWD 3 ns max
• ARW grade (5 V): data rate 1 Mbps min, propagation delay 50–100 ns
• Common-mode transient immunity: 25 kV/μs min, 35 kV/μs typ (VCM = 1000 V)
• Output enable/disable delay: 6 ns typ, 8 ns max; output rise/fall time 2.5 ns typ

Features:

• Automotive versions qualified per AEC-Q100
• Low power: 1.0 mA per channel max at 0–2 Mbps (5 V)
• Bidirectional communication
• 3 V/5 V level translation
• High temperature operation: 125 °C
• Data rate dc to 90 Mbps (NRZ)
• 2 ns max pulse width distortion and 2 ns max channel-to-channel matching (CRW)
• Output enable function
• Patented refresh feature for dc correctness
• Safety approvals: UL 1577 (2500 V rms, 1 min), CSA, VDE V 0884-10 (VIORM = 560 V peak), TÜV IEC/EN/UL/CSA 61010-1
• RoHS-compliant models available

Applications:

• General-purpose multichannel isolation
• SPI interface/data converter isolation
• RS-232/RS-422/RS-485 transceivers
• Industrial field bus isolation
• Automotive systems

Package:

• 16-lead SOIC wide body

Automotive versions qualified per AEC-Q100 Low power operation

General-purpose multichannel isolation SPI interface/data converter isolation RS-232/RS-422/RS-485 transceivers Industrial field bus isolation Automotive systems

4.5 V ≤ VDD1 ≤ 5.5 V , 4.5 V ≤ VDD2 ≤ 5.5 V; all minimum/maximum specifications apply over the entire recommended operation range, unless otherwise noted; all typical specifications are at TA = 25°C, VDD1 = VDD2 = 5 V . These specifications do not apply to ADuM1400W , ADuM1401W, and ADuM1402W automotive grade versions.

Table 1.

1 All voltages are relative to their respective ground.

2 The supply current values for all four channels are combined when running at identical data rates. Output supply current values are specified with no output load present. The supply current associated with an individual channel operating at a given data rate may be calculated as described in the section. See F through F for information on per-channel supply current as a function of data rate for unloaded and loaded conditions. See F through for total VDD1 and VDD2 supply currents as a function of data rate for ADuM1400/ADuM1401/ADuM1402 channel configurations. Power Consumption igure 8 igure 10 igure 11 Figure 15

3 The minimum pulse width is the shortest pulse width at which the specified pulse width distortion is guaranteed.

4 The maximum data rate is the fastest data rate at which the specified pulse width distortion is guaranteed.

5 tPHL propagation delay is measured from the 50% level of the falling edge of the VIx signal to the 50% level of the falling edge of the VOx signal. tPLH propagation delay is measured from the 50% level of the rising edge of the VIx signal to the 50% level of the rising edge of the VOx signal.

6 tPSK is the magnitude of the worst-case difference in tPHL or tPLH that is measured between units at the same operating temperature, supply voltages, and output load within the recommended operating conditions.

7 Codirectional channel-to-channel matching is the absolute value of the difference in propagation delays between any two channels with inputs on the same side of the isolation barrier. Opposing-directional channel-to-channel matching is the absolute value of the difference in propagation delays between any two channels with inputs on opposing sides of the isolation barrier.

8 CMH is the maximum common-mode voltage slew rate that can be sustained while maintaining VO > 0.8 VDD2. CML is the maximum common-mode voltage slew rate that can be sustained while maintaining VO < 0.8 V. The common-mode voltage slew rates apply to both rising and falling common-mode voltage edges. The transient magnitude is the range over which the common mode is slewed.

Power Consumption Figure 8 Figure 10 9 Dynamic supply current is the incremental amount of supply current required for a 1 Mbps increase in signal data rate. See through for information on per-channel supply current for unloaded and loaded conditions. See the section for guidance on calculating the per-channel supply current for a given data rate.

Ambient temperature = 25°C, unless otherwise noted.