ADG704BRMZ
The ADG704BRMZ is an electronic component from Analog Devices. View the full ADG704BRMZ datasheet below including key specifications, pinout, absolute maximum ratings.
Manufacturer
Analog Devices
Category
Analog Switches and Multiplexers
Package
10-TFSOP, 10-MSOP (0.118", 3.00mm Width)
Lifecycle
Production (Last Updated: 3 years ago)
Key Specifications
| Parameter | Value |
|---|---|
| -3db Bandwidth | 200 MHz |
| -3db Bandwidth | 200MHz |
| Bandwidth | 200 MHz |
| Case/Package | MSOP |
| Channel Capacitance (CS(off), CD(off)) | 9pF, 37pF |
| Charge Injection | 3pC |
| Contact Plating | Tin |
| Crosstalk | -82dB @ 1MHz |
| Current - Leakage (IS(off)) (Max) | 100pA |
| Drain to Source Resistance | 35 Ω |
| Height | 850 µm |
| High Level Output Current | 30 mA |
| Interface | Parallel |
| Length | 3 mm |
| Lifecycle Status | Production (Last Updated: 3 years ago) |
| Manufacturer Lifecycle Status | PRODUCTION (Last Updated: 3 years ago) |
| Max Operating Temperature | 85 °C |
| Max Power Dissipation | 315 mW |
| Max Supply Current | 1 µA |
| Max Supply Voltage | 5.5 V |
| Min Operating Temperature | -40 °C |
| Min Supply Voltage | 1.8 V |
| Mounting Type | Surface Mount |
| Multiplexer/Demultiplexer Circuit | 4:1 |
| Nominal Supply Current | 1 µA |
| Number of Channels | 4 |
| Number of Circuits | 1 |
| Number of Circuits | 1 |
| Number of Inputs | 4 |
| Number of Outputs | 1 |
| Number of Pins | 10 |
| On-State Resistance (Max) | 4Ohm |
| Operating Supply Current | 1 nA |
| Operating Supply Voltage | 5 V |
| Operating Temperature | -40°C ~ 85°C (TA) |
| Package / Case | 10-TFSOP, 10-MSOP (0.118", 3.00mm Width) |
| Packaging | Bulk |
| Power Dissipation | 5 µW |
| Radiation Hardening | No |
| REACH SVHC | No |
| Resistance | 4 Ω |
| RoHS | Compliant |
| Schedule B | 8542390000, 8542390000|8542390000|8542390000|8542390000|8542390000|8542390000|8542390000|8542390000|8542390000|8542390000|8542390000|8542390000|8542390000|8542390000|8542390000|8542390000|8542390000|8542390000|8542390000|8542390000|8542390000|8542390000|8542390000|85 |
| Supplier Device Package | 10-MSOP |
| Switch Circuit | SP4T |
| Switch Time (Ton, Toff) (Max) | 14ns, 6ns (Typ) |
| Throw Configuration | 4PST |
| Turn-Off Delay Time | 6 ns |
| Turn-On Delay Time | 16 ns |
| Voltage - Supply, Single (V+) | 1.8V ~ 5.5V |
| Width | 3 mm |
Overview
The ADG704 is a CMOS analog multiplexer, comprising four single channels. This multiplexer is designed on an advanced submicron process that provides low power dissipation yet gives high switching speed, low on resistance, low leakage currents and high bandwidths.
The on resistance profile is very flat over the full analog signal range. This ensures excellent linearity and low distortion when switching audio signals. Fast switching speed also makes the part suitable for video signal switching.
The ADG704 can operate from a single supply range of +1.8 V to +5.5 V, making it ideal for use in battery powered instruments and with the new generation of DACs and ADCs from Analog Devices.
The ADG704 switches one of four inputs to a common output, D, as determined by the 3-bit binary address lines, A0, A1 and EN. A Logic '0' on the EN pin disables the device.
Each switch of the ADG704 conducts equally well in both directions when ON. The ADG704 exhibits break-before-make switching action.
The ADG704 is available in 10-lead m SOIC package.
W)
Features
+1.8 V to +5.5 V Single Supply 2.5 V (Typ) On Resistance Low On-Resistance Flatness -3 dB Bandwidth >200 MHz Rail-to-Rail Operation 10-Lead m SOIC Package Fast Switching Times tON 20 ns tOFF 13 ns Typical Power Consumption (<0.01 m
TTL/CMOS Compatible
Applications
Battery Powered Systems Communication Systems Sample-and-Hold Systems Audio Signal Routing Data Acquisition System Video Switching
Pin Configuration
ADG704BRMZ Pinout
Package: 10-TFSOP (10-Lead MSOP, 3.00mm Width)
| Pin Number | Pin Name | Type | Description |
|---|---|---|---|
| 1 | A0 | I | Address Input 0 |
| 2 | S1 | I/O | Switch 1 (Analog) |
| 3 | GND | P | Ground |
| 4 | S3 | I/O | Switch 3 (Analog) |
| 5 | EN | I | Enable Input |
| 6 | VDD | P | Positive Supply Voltage |
| 7 | S4 | I/O | Switch 4 (Analog) |
| 8 | D | I/O | Common Analog (Multiplexer Output) |
| 9 | S2 | I/O | Switch 2 (Analog) |
| 10 | A1 | I | Address Input 1 |
Notes
- A0, A1: Address inputs select which switch (S1–S4) connects to the common node D.
- S1–S4: Analog switch terminals; one is connected to D based on A0/A1 logic state.
- EN: Active-high enable; when low, all switches are off.
- D: Common analog node (multiplexer output/input).
- Pin numbering derived from the TOP VIEW diagram in the datasheet.
Absolute Maximum Ratings
(TA = +25 C unless otherwise noted)
| A V DD to GND . . . . . . . . . . . . . . . . . | . . . . . . . . . -0.3 V to +6 V |
|---|---|
| Analog, Digital Inputs 2 . . . . . . . . . | . -0.3 V to V DD +0.3 V or |
| 30 Continuous Current, S or D . . . . . | mA, Whichever Occurs First . . . . . . . . . . . . . . . 30 mA . . . . . . . . . . . |
| Peak Current, S or D . . . . . . . . . . . | . . . 100 mA |
| (Pulsed at | Cycle Max) |
| 1 ms, 10% Duty Range | 1 ms, 10% Duty Range |
| Operating Temperature Industrial (B Version) . . . . . . . . | . . . . . . . . -40 C to +85 C |
| Storage Temperature Range . . . . . | . . . . . . . -65 C to +150 C |
| Junction Temperature . . . . . . . . . . m | . . . . . . . . . . . . . . +150 C |
| q JA Thermal Impedance | |
| . . . . . . . | . . . . . . . . . . . . . 206 C/W |
| Lead Temperature, Soldering Vapor Phase (60 sec) . . . . . . . . . Infrared (15 sec) . . . . . . . . . . . . . | . . . . . . . . . . . . . . +215 C . . . . . . . . . . . . . . +220 C |
| ESD . . . . . . . . . . . . . . . . . . . . . . . . | . . . . . . . . . . . . . . . . . 2 kV |
Related Variants
The following components are covered by the same datasheet.
Get structured datasheet data via API
Get started free