Skip to main content

We use cookies to understand how you use our site and improve your experience. See our Privacy Policy.

ADG1612BRUZ

Quad SPST Analog Switch

The ADG1612BRUZ is a quad spst analog switch from Analog Devices. View the full ADG1612BRUZ datasheet below including key specifications.

ADG1612BRUZ shares its datasheet with ADG1612, whose page lists every part number it covers.

Official ADG1612BRUZ datasheet (PDF) — the source this page was extracted from.

Manufacturer

Analog Devices

Category

Quad SPST Analog Switch

Package

TSSOP-16 (RU-16)

Lifecycle

Production (Last Updated: 19 hours ago)

ADG1612BRUZ Key Specifications

ParameterValue
-3db Bandwidth38 MHz
Case/PackageTSSOP
Drain to Source Resistance2.15 Ω
Dual Supply Voltage5 V
Height1.2 mm
Lead FreeContains Lead
Length5.1 mm
Lifecycle StatusProduction (Last Updated: 19 hours ago)
Manufacturer Lifecycle StatusPRODUCTION (Last Updated: 19 hours ago)
Max Dual Supply Voltage8 V
Max Operating Temperature125 °C
Max Power Dissipation5.8 mW
Max Supply Current480 µA
Max Supply Voltage16 V
Min Dual Supply Voltage3.3 V
Min Operating Temperature-40 °C
Min Supply Voltage3.3 V
Number of Channels4
Number of Circuits4
Number of Inputs4
Number of Outputs4
Number of Pins16
Power Dissipation5.8 mW
Radiation HardeningNo
REACH SVHCUnaffected
RoHSCompliant
Schedule B8542390000, 8542390000|8542390000|8542390000|8542390000|8542390000
Supply TypeDual, Single
Test Frequency1 MHz
Turn-Off Delay Time137 ns
Turn-On Delay Time212 ns
Width4.5 mm

ADG1612BRUZ Overview

Part: ADG1612 — Analog Devices (ADG1611/ADG1612/ADG1613 family)

Type: Quad SPST Analog Switch

Description: Quad SPST CMOS switch with 1 Ω typical on resistance, ±3.3 V to ±8 V dual-supply or 3.3 V to 16 V single-supply operation, and 3 V logic-compatible inputs. The ADG1612 switches turn on with Logic 1.

Operating Conditions:

  • Supply voltage: ±3.3 V to ±8 V dual supply, or 3.3 V to 16 V single supply (VDD/VSS min/max)
  • Operating temperature: -40 to +125 °C (Y version)
  • Analog signal range: VSS to VDD
  • Digital inputs: VINH 2.0 V min, VINL 0.8 V max

Absolute Maximum Ratings:

  • VDD to VSS: 18 V
  • VDD to GND: -0.3 V to +18 V
  • Analog inputs: VSS - 0.3 V to VDD + 0.3 V or 30 mA, whichever occurs first
  • Peak current, S or D: 630 mA (pulsed at 1 ms, 10% duty cycle max)
  • Junction temperature: 150 °C
  • Storage temperature: -65 to +150 °C

Key Specs:

  • On resistance (±5 V dual supply, VS = ±4.5 V, IS = -10 mA): 1 Ω typ, 1.2 Ω max at 25 °C, 1.6 Ω max at -40 to +125 °C
  • On resistance flatness (±5 V): 0.2 Ω typ
  • On resistance (12 V single supply): 0.95 Ω typ; 1.1 Ω max at 25 °C
  • Off leakage (±5 V, 25 °C): ±0.1 nA typ for source and drain
  • Switching time (±5 V, RL = 300 Ω, CL = 35 pF): tON 165 ns typ, tOFF 105 ns typ
  • Charge injection (±5 V): 140 pC typ
  • -3 dB bandwidth (±5 V): 42 MHz typ
  • THD+N (±5 V, 5 V p-p, 20 Hz to 20 kHz): 0.007% typ
  • IDD (±5 V supplies, digital inputs at 0 V or VDD): 0.001 μA typ, 1.0 μA max
  • Continuous current per channel at 25 °C (±5 V supplies): 175 mA (TSSOP), 280 mA (LFCSP)

Features:

  • 1 Ω typical on resistance with 0.2 Ω flatness
  • ±3.3 V to ±8 V dual-supply or 3.3 V to 16 V single-supply operation
  • No VL supply required
  • 3 V logic-compatible inputs
  • Rail-to-rail operation
  • Ultralow power dissipation (<16 nW)
  • ADG1613 variant offers break-before-make switching

Applications:

  • Communication systems
  • Medical systems
  • Audio and video signal routing
  • Automatic test equipment
  • Data acquisition systems
  • Battery-powered systems
  • Sample-and-hold systems
  • Relay replacements

Package:

  • 16-lead TSSOP
  • 16-lead LFCSP (4 mm × 4 mm)

ADG1612BRUZ Features

1 Ω typical on resistance 0.2 Ω on resistance flatness ±3.3 V to ±8 V dual-supply operation 3.3 V to 16 V single-supply operation No VL supply required 3 V logic-compatible inputs Rail-to-rail operation Continuous current per channel LFCSP package: 280 mA TSSOP package: 175 mA 16-lead TSSOP and 16-lead, 4 mm × 4 mm LFCSP

ADG1612BRUZ Applications

Communication systems Medical systems Audio signal routing Video signal routing Automatic test equipment Data acquisition systems Battery-powered systems Sample-and-hold systems Relay replacements

ADG1612BRUZ Pin Configuration

Figure 4. 16-Lead TSSOP Pin Configuration

Table 7. Pin Function Descriptions

Figure 5. 16-Lead LFCSP Pin Configuration

Pin No. - 16-LeadTSSOPPin No. - 16-Lead LFCSPMnemonicDescription
115IN1Logic Control Input.
216D1Drain Terminal. This pin can be an input or output.
31S1Source Terminal. This pin can be an input or output.
42V SSMost Negative Power Supply Potential.
53GNDGround (0 V) Reference.
64S4Source Terminal. This pin can be an input or output.
75D4Drain Terminal. This pin can be an input or output.
86IN4Logic Control Input.
97IN3Logic Control Input.
108D3Drain Terminal. This pin can be an input or output.
119S3Source Terminal. This pin can be an input or output.
1210NCNo Connection.
1311V DDMost Positive Power Supply Potential.
1412S2Source Terminal. This pin can be an input or output.
1513D2Drain Terminal. This pin can be an input or output.
1614IN2Logic Control Input.
Not applicable17 (EPAD)EP (EPAD)Exposed Pad. Tied to substrate,V SS .

Variants on the same datasheet

These parts have exact links to the same datasheet. They are candidates to compare, not verified drop-in replacements; check package, pinout and electrical limits.

Part NumberManufacturerPackage
ADG1611Analog Devices—
ADG1612Analog DevicesTSSOP-16 (RU-16)
ADG1612BCPZAnalog Devices—
ADG1612BCPZ-REEL7Analog DevicesLFCSP_VQ-16 (CP-16-13)
ADG1612BRUZ-REELAnalog DevicesTSSOP-16 (RU-16)
ADG1612BRUZ-REEL7Analog DevicesTSSOP-16 (RU-16)
ADG1612INXAnalog Devices—
ADG1613Analog Devices—

More datasheets

All Analog Devices datasheets (757)

Data on this page is extracted from publicly available manufacturer datasheets using automated tools including AI. It may contain errors or omissions. Always verify specifications against the official manufacturer datasheet before making design or purchasing decisions. See our Terms of Service. Rights holders can submit a takedown request.

Ask your AI agent about the ADG1612BRUZ

Connect SheetsData to Claude, Cursor, Codex or any MCP client and your agent reads this datasheet for you: pinout, limits, register maps and design checks, with the numbers taken from the PDF.

claude mcp add --transport http sheetsdata https://mcp.sheetsdata.com/mcp

Then ask: "Can the ADG1612BRUZ run from my 12 V rail? Check it against the datasheet limits."

Create a free account $2 of usage every month, no card needed.