Wurth Elektronik PCBTransformers, 5Vsecondary_voltage, 5.5V DC primary voltage

It has to be clearly pointed out that the possibility of a malfunction of electronic components or failure before the end of the usual lifetime cannot be completely eliminated in the current state of the art, even if the products are operated within the range of the specifications. In certain customer applications requiring a very high level of safety and especially in customer applications in which the malfunction or failure of an electronic component could endanger human life or health it must be ensured by most advanced technological aid of suitable design of the customer application that no injury or damage is caused to third parties in the event of malfunction or failure of an electronic component. Therefore, customer is cautioned to verify that data sheets are current before placing orders. The current data sheets can be downloaded at www.we-online.com.

WE-PPTI Push-Pull Transformer 750315371 — 6-Pin SMD Package

Notes

• Package: 1208 SMD (surface-mount transformer)
• Winding Configuration: Push-pull transformer with two primary windings (N1, N2) and two secondary windings (N3, N4)
• Turns Ratio: N1+N2 : N3+N4 = 1:1.1
• Primary DC Resistance: 0.09 Ω max. (N1+N2 combined at 20 °C)
• Secondary DC Resistance: 0.09 Ω max. (N3+N4 combined at 20 °C)
• Inductance: 72 μH min. (N1+N2 at 100 kHz, 10 mVAC)
• Insulation Test Voltage: 2500 V AC (N1,2 to N3,4)
• Pin numbering derived from the schematic diagram showing the 6-pin layout with N1/N2 on the left (primary) and N3/N4 on the right (secondary).

Input: N1 / N2

Output 1: N3 / N4

Table shows a typical application. Values may vary by application.