74AHCT1G79GV
Single D-type Flip-FlopThe 74AHCT1G79GV is a single d-type flip-flop from Nexperia. View the full 74AHCT1G79GV datasheet below including key specifications.
74AHCT1G79GV shares its datasheet with 74AHC1G79, whose page lists every part number it covers.
Official 74AHCT1G79GV datasheet (PDF) — the source this page was extracted from.
74AHCT1G79GV Key Specifications
| Parameter | Value |
|---|---|
| VIH (AHC) | 1.5 V min at VCC = 2.0 V; 3.85 V min at 5.5 V. VIL (AHC): 0.5 V max at 2.0 V; 1.65 V max at 5.5 V |
| VIH / VIL (AHCT, VCC = 4.5–5.5 V) | 2.0 V min / 0.8 V max |
| VOH at VCC = 4.5 V, IO = -8.0 mA | 3.94 V min (25 °C); 3.70 V min (-40 to +125 °C) |
| VOL at VCC = 4.5 V, IO = 8.0 mA | 0.36 V max (25 °C); 0.55 V max (-40 to +125 °C) |
| ICC (VCC = 5.5 V) | 1.0 μA max (25 °C); 40 μA max (-40 to +125 °C) |
| AHCT additional ICC at VI = 3.4 V | 1.35 mA max (25 °C), 1.5 mA max (to +125 °C) |
| tpd CP to Q (AHC, VCC = 4.5–5.5 V, CL = 15 pF) | 3.5 ns typ, 5.6 ns max (25 °C) |
| fmax | 90 MHz min (25 °C); 70 MHz min (-40 to +125 °C) |
| Setup time D to CP | 3.0 ns (25 °C); 4.0 ns (-40 to +125 °C) |
| Input leakage | 0.1 μA max (25 °C); input capacitance 1.5 pF typ |
| CPD | 15 pF (AHC), 16 pF (AHCT) |
74AHCT1G79GV Overview
Part: 74AHC1G79GW (also 74AHCT1G79GW, 74AHC1G79GV, 74AHCT1G79GV) — Nexperia
Type: Single D-type flip-flop, positive-edge trigger
Description: High-speed Si-gate CMOS single positive-edge triggered D-type flip-flop with a 2.0–5.5 V supply range (AHC, CMOS input levels) or 4.5–5.5 V (AHCT, TTL input levels), specified from -40 to +125 °C.
Operating Conditions:
- Supply voltage: 2.0–5.5 V (74AHC1G79); 4.5–5.5 V (74AHCT1G79)
- Operating temperature: -40 to +125 °C (ambient)
- Input voltage: 0–5.5 V; output voltage: 0 to VCC
- Input transition rise/fall rate: max 20 ns/V at VCC = 5.0 V ± 0.5 V
Absolute Maximum Ratings:
- Max supply voltage: 7.0 V (min -0.5 V)
- Input voltage: -0.5 to +7.0 V
- Output current: ±25 mA
- Supply current: 75 mA; ground current: -75 mA
- Storage temperature: -65 to +150 °C
- Total power dissipation: 250 mW (Tamb = -40 to +125 °C)
Key Specs:
- VIH (AHC): 1.5 V min at VCC = 2.0 V; 3.85 V min at 5.5 V. VIL (AHC): 0.5 V max at 2.0 V; 1.65 V max at 5.5 V
- VIH / VIL (AHCT, VCC = 4.5–5.5 V): 2.0 V min / 0.8 V max
- VOH at VCC = 4.5 V, IO = -8.0 mA: 3.94 V min (25 °C); 3.70 V min (-40 to +125 °C)
- VOL at VCC = 4.5 V, IO = 8.0 mA: 0.36 V max (25 °C); 0.55 V max (-40 to +125 °C)
- ICC (VCC = 5.5 V): 1.0 μA max (25 °C); 40 μA max (-40 to +125 °C)
- AHCT additional ICC at VI = 3.4 V: 1.35 mA max (25 °C), 1.5 mA max (to +125 °C)
- tpd CP to Q (AHC, VCC = 4.5–5.5 V, CL = 15 pF): 3.5 ns typ, 5.6 ns max (25 °C)
- fmax: 90 MHz min (25 °C); 70 MHz min (-40 to +125 °C)
- Setup time D to CP: 3.0 ns (25 °C); 4.0 ns (-40 to +125 °C)
- Input leakage: 0.1 μA max (25 °C); input capacitance 1.5 pF typ
- CPD: 15 pF (AHC), 16 pF (AHCT)
Features:
- Symmetrical output impedance
- High noise immunity
- Low power dissipation
- Balanced propagation delays
- ESD protection: HBM exceeds 2000 V, MM exceeds 200 V, CDM exceeds 1000 V
- Specified from -40 to +125 °C
Applications:
- General-purpose clocked data storage and logic
Package:
- TSSOP5 (SOT353-1), 5 leads, 1.25 mm body width: 74AHC1G79GW / 74AHCT1G79GW
- SC-74A (SOT753), 5 leads: 74AHC1G79GV / 74AHCT1G79GV
74AHCT1G79GV Features
- Symmetrical output impedance
- High noise immunity
- Low power dissipation
- Balanced propagation delays
- SOT353-1 and SOT753 package options
- ESD protection:
- HBM JESD22-A114F: exceeds 2000 V
- MM JESD22-A115-A: exceeds 200 V
- CDM JESD22-C101C: exceeds 1000 V
- Specified from 40 C to +125 C
74AHCT1G79GV Pin Configuration
| Symbol | Pin | Description |
|---|---|---|
| D | 1 | data input |
| CP | 2 | clock pulse input |
| GND | 3 | ground (0 V) |
| Q | 4 | data output |
| V CC | 5 | supply voltage |
74AHCT1G79GV Recommended Operating Conditions
Voltages are referenced to GND (ground = 0 V).
| Symbol | Parameter | Conditions | 74AHC1G79 - Min | 74AHC1G79 - Typ | 74AHC1G79 - Max | 74AHCT1G79 - Min | 74AHCT1G79 - Typ | 74AHCT1G79 - Max | Unit |
|---|---|---|---|---|---|---|---|---|---|
| V CC | supply voltage | 2.0 | 5.0 | 5.5 | 4.5 | 5.0 | 5.5 | V | |
| V I | input voltage | 0 | - | 5.5 | 0 | - | 5.5 | V | |
| V O | output voltage | 0 | - | V CC | 0 | - | V CC | V | |
| T amb | ambient temperature | 40 | +25 | +125 | 40 | +25 | +125 | C | |
| t/ V | input transition rise and fall rate | V CC = 3.3 V 0.3 V | - | - | 100 | - | - | - | ns/V |
| t/ V | input transition rise and fall rate | V CC = 5.0 V 0.5 V | - | - | 20 | - | - | 20 | ns/V |
74AHCT1G79GV Package Information
| 81,7 | ș |
|---|---|
| PP |
| 287/,1( 9(56,21 | 5()(5(1&(6 - ,(& | 5()(5(1&(6 - -('(& | 5()(5(1&(6 - -(,7$ | (8523($1 - 352-(&7,21 | ,668( '$7( |
|---|---|---|---|---|---|
| 627 | 02 | 6& $ |
Fig 7. Package outline SOT353-1 (TSSOP5)
Single D-type flip-flop; positive-edge trigger
3ODVWLF VXUIDFH PRXQWHG SDFNDJH OHDGV
Single D-type flip-flop; positive-edge trigger
Variants on the same datasheet
These parts have exact links to the same datasheet. They are candidates to compare, not verified drop-in replacements; check package, pinout and electrical limits.
| Part Number | Manufacturer | Package |
|---|---|---|
| 74AHC1G79 | Nexperia | — |
| 74AHC1G79GV | Nexperia | SC-74A (SOT753) |
| 74AHC1G79GW | Nexperia | TSSOP-5 |
| 74AHCT1G79GW | Nexperia | TSSOP5 (SOT353-1) |
More datasheets
Ask your AI agent about the 74AHCT1G79GV
Connect SheetsData to Claude, Cursor, Codex or any MCP client and your agent reads this datasheet for you: pinout, limits, register maps and design checks, with the numbers taken from the PDF.
claude mcp add --transport http sheetsdata https://mcp.sheetsdata.com/mcp
Then ask: "Can the 74AHCT1G79GV run from my 12 V rail? Check it against the datasheet limits."
Create a free account $2 of usage every month, no card needed.